The Daisy office staff are awesome!
The Daisy office staff are awesome!
They are always so happy and helpful, its great calling you guys
Swimart Erindale
ACT-Based Daisy Expert
Committed to Quality
Daisy Pool Covers only offer energy and water efficient products so our
customers can enjoy their pools for longer.
Daisy Pre-Cut Pool Covers
At Daisy, we use a 3D point-capturing device to measure pool shells in the manufacturer’s yard, enabling us to robotically cut our pool covers to match the pool shell's exact shape. These covers come complete with radius corners so they can be cut to fit the waterline or installed oversized with an upturn.
Our pre-cut pool cover data is collected from new pool shells to ensure shape accuracy. Variations in cover fit can occur from the pool installation due to the pool base screening and backfilling affecting the top profile of the pool, or if the manufacturer alters the mould. This can result in a slightly different cover fit, perhaps even showing water or uneven upturn in some areas. There is nothing wrong with the pool installation or the cover fit, and this doesn't affect the cover's functionality.
Our standard upturn cut leaves a 20mm upturn, with the option of a waterline cut.
Get a delivery quote
Enter your postcode to review your delivery costs
Get a delivery quote
Enter your postcode to review your delivery costs
Daisy Expert Locations
Enter your postcode and click the find locations button.
The Difference between Free Standing and Backless Enclosures
Free Standing
- Rear Panel: A free standing pool pump & filter enclosure includes a rear panel with wooden insert to mount equipment, providing a fully enclosed structure on all sides.
- Best suited for situations where there is ample space behind the equipment and something to mount, ensuring full protection and sound insulation.
Backless
- Backless pool pump & filter enclosures utilise two wall strips to connect the pool pump and filter enclosure to the wall, with a horizontal bridge attached to the top of the wall strips to ensure the system is fully enclosed. These wall strips are to be attached to the wall, with three locations available along the height.
- Additional Depth Note: Backless pool pump & filter enclosures add 50mm to the depth of the Free Standing model
- Optimal for Tight Spaces: Designed for scenarios where the equipment is located within 50mm of a wall. The absence of a rear panel allows the box to fit against the wall, providing flexibility for equipment, pipes, and electrical connections to be positioned on the wall inside the pool pump and filter enclosure.
Measurement Considerations
Internal and External Measurements:
Concrete Slab Allowance:
Lid Clearance:
Include step in roller width
Rollers are typically supplied to suit the main body of the pool (A only) to have the step area either folded over or as a separate piece, however, you can order the roller to suit the main body plus the step area (A + A1) so the pool cover and step area is recovered ‘flat’ onto the roller.
If the step area is to be folded on the cover for recovery, it is recommended to have the roller at the non-step area end so the folded section recovery is as small as possible.
Folding a step area at the start of the pool cover recovery is not recommended as the cover becomes thicker on the fold side that will make the roll uneven.
Folding large step areas is not recommended.
Note: Some roller models cant have step areas folded over, contact Daisy for tricky installations.
