Wind Skirting – What is it?

Wind Skirting - What is it? 1

When outdoor pool covers are installed to most domestic swimming pools, they reach the edge of the pool and sit on the water. Wind does not affect the pool cover as the wind will not lift the cover: the pool cover edge is right up to the edge of the pool so there is nothing for the wind to get hold of.

However, there are times when the pool cover is not all the way to the edge of the pool, or like in many commercial installations there are multiple cover and roller systems on the pool to cover the whole pool surface area. Where the edges of the cover are exposed to the wind along the pool they can be picked up by the wind. If they get picked up they can be blown around like a sail and become quite messy not to mention may be damaged, so we need to hold exposed edges of the cover onto the water.

Wind Skirting is a special woven mesh material that is sewn with Teflon thread (so the thread will never fail) to the edge of a pool cover. The special mesh material holds a stable lead core rope that is heavy enough to pull just the edge (10 – 30mm) of a foam or solar pool cover under the water.

By pulling just the edge of the cover under water the wind cant get under the pool cover so it sits neatly in place.

While Wind Skirting is especially made for multiple covers installed onto one pool in commercial installations, we still use Wind Skirting for domestic covers where you need to hold joint covers onto the pool. It may be for sections where the cover is cut to make the recovery and deploying easier or for large areas (like step areas) to be put on separately. We also use Wind Skirting on domestic pools for vanishing edges or infinity edged pools to rest on the inside of the wall to hold the cover in place.

Wind Skirting is sold by the lineal meter sewn onto the cover before it leaves the factory.

Contact us or our Commercial team for more information depending on the type of swimming pool you have.

Wind Skirting - What is it? 2