Cover keeps moving to one side
This normally happens on a kidney-shaped or curved pool with an ‘inside curve’. When the cover is cut allowing an even 75-100mm upturn all around, the upturn on the ‘inside curve’ tends to push the cover away from that side and up over the opposite edge of the pool. Carefully trim the cover flat to the waterline on the ‘inside curve’ side or put some dressmaking tucks in the upturn along the ‘inside curve’ to alleviate the pressure.
The cover is being moved by water return jets angled up directing the water at the cover – or, jets set too high in the pool. If a jet is aimed up at the cover, loosen it and aim down, away from the cover. If the jets are too high, you may be able to add more water to bring the water level above the return jets. If not, you need to contact your local pool shop about a redirection fitting to move the return water jets further under the water level.
I’d like to thank you very much
Dear Shannon and Brett,
My replacement pool cover arrived today and it fits my pool perfectly. I’d like to thank you very much for promptly addressing my issues and going to so much trouble to ensure that the replacement was the perfect fit. I particularly appreciate that you did this at such a busy time of year. I acknowledge that the circumstances behind the first cover not fitting were strange, and I was impressed that despite that, Daisy Pool Covers didn’t hesitate to take the issue on board and ensure that I am now a very satisfied customer.
All the best for 2019.
Paul
Murrumbateman, NSW Customer
Committed to Quality
Daisy Pool Covers only offer energy and water efficient products so our
customers can enjoy their pools for longer.
