Cover keeps moving to one side
This normally happens on a kidney-shaped or curved pool with an ‘inside curve’. When the cover is cut allowing an even 75-100mm upturn all around, the upturn on the ‘inside curve’ tends to push the cover away from that side and up over the opposite edge of the pool. Carefully trim the cover flat to the waterline on the ‘inside curve’ side or put some dressmaking tucks in the upturn along the ‘inside curve’ to alleviate the pressure.
The cover is being moved by water return jets angled up directing the water at the cover – or, jets set too high in the pool. If a jet is aimed up at the cover, loosen it and aim down, away from the cover. If the jets are too high, you may be able to add more water to bring the water level above the return jets. If not, you need to contact your local pool shop about a redirection fitting to move the return water jets further under the water level.
I have never dealt with anyone as good as Daisy
Shane is the most wonderful workman I have ever had the privilege of having in my home. Shane has just finished fitting the new pool cover to my roller, he is absolutely just wonderful!
I have never dealt with anyone as good as Daisy, I am so grateful for all the help Shane gave me. He told me how to control and use it properly after the last company didn’t bother. Shane made it so easy to use and he made sure I knew how easy it was as well.
Shane went above and beyond, he was a very caring young man, simply a joy to deal with
P.Boscarello Iluka
WA Based Customer
Committed to Quality
Daisy Pool Covers only offer energy and water efficient products so our
customers can enjoy their pools for longer.
